If you’re looking to build a passive home in 2026 look no further than PCS structures passive house Builder New York. PCS structures is founded by a group of professionals that specialize in the sale, construction and building of high performance buildings. We have been to offer a whole variety of building styles that all have one thing in common: they are all SHEDI® products and all SHEDI® Buildings are built using structural insulated panels. structural insulated panels are a great and easy way to achieve a passive house due to their air tightness and High Energy Efficiency. Not only are structural insulated panels super efficient they are also very strong. People use structural insulated panels to build homes in high hurricane wind Force areas due to their Superior strength characteristics but strength is just one of the great benefits that come to building with SIPs. If you’re looking to build a passive house you’re looking for that super high energy efficiency which is easily achieved when building with structural insulated panels. PCS structures passive house Builder New York specializes in building with structural insulated panels due to their high performance and ease of assembly. We recognize that we can be super efficient when building with structural insulated panels getting you and your new passive house faster and also achieving a bomber building. It’s almost like you never get those two things at one time but in this case when building a SHEDI® building you do.. PCS structures passive house Builder New York would love to talk to you about our products and help you find one that works for you. There are plenty of flexible design options from building just a traditional look and style of a home all the way to modern styles of homes but there is absolutely nothing traditional about our homes.
Traditional homes are leaky and normally built using just 2×4 stick Lumber which makes it really hard to fill all the gaps and cracks in your home and does not allow you to really control the air that is coming and going from your home. It is also not a good insulator so every single place that you have a wood stud, yes you might have insulation in between the studs but that would start leaking your heat out of your home. If you drive down the street a day or two after a snowstorm and you look at the roofs of your neighbor’s home or even your house existing house you’ll either see lines running up and down the building that look like the stick framing or you’ll see wide gaps and small lines that also look like the stick framing this either means that there is either no insulation in between the attic joists or there is insulation and you can see how much the wood is leaking the heat out of the home. This is called thermal bridging and thermal bridging just is not a problem when it comes to a SHEDI® building built with structural insulated panels. A SHEDI® Only found with PCS structures passive house Builder New York is a building built with structure insulated panels has continuous insulation and only would in places where it’s required for structural characteristics this means you can have an entire roof that has continuous insulation across the whole entire span due to the fact that insulated splines are used to connect the panels together you will have absolutely no lines in that snowstorm if your panels are assembled properly. This is why we recommend using a reputable experience structural insulated panel Builder like PCS structures passive house build in New York. When our buildings are assembled properly you will have Superior air tightness and the opposite of a leaky home. Other examples of thermal bridging are on a cold morning. You can look at the wall of traditional framed houses and you can see that there’s a slight bit of moisture buildup in the areas where the insulation is and it looks like you can see the traditional framing from the outside of the building. This is due to thermal bridging and the fact that traditional framing methods are dated and the wood used to assemble your home is leaking your heat. This is another issue that is just not a thing when it comes to building a structural insulated panel building. You can have an entire wall that is fully insulated continuously with very minimal thermal bridging.
One question we get asked a ton is with all that insulation in the walls and no studs how do you run the electrical and the plumbing? That is why you want to work with a company like PCS structures passive house builder New York because we know exactly how it can be done. Inside the structural insulated panels are pre-cut wire chases; they can be custom to whatever Heights you’re looking for but come standard at standard Heights for outlets and switches and also run vertically. These wire chases are then labeled by the panel manufacturer which we work with two of the best panel manufacturers in America to make sure that this is on point. These marks are easily located by your electrician and the chases are easily snakable to get wires wherever needed. Now in the case that you cannot get a wire somewhere where needed there are options to avoid any issues. when building your passive house or passive home with PCS structures passive house Builder New York I’d imagine you’re more concerned about your Energy Efficiency and having a great structure as opposed to being able to run a wire in a certain location. Luckily we are aware of that and we know how to get it done. It’s as simple as adding furring strips to a wall if there are any issues that come about when running the electrical through the insulation. It is a quick and easy way to make it happen and the same thing goes for your plumbing. Another question I ask the customer is what makes you think all of the electrical and plumbing will only be run on the exterior walls. with proper planning which you get when working with PCS structures passive house Builder New York you can plan out your mechanical runs when creating the layout of your home and making it easy for the trades to get their job done and also for things to be done in the future easily.